Airborne particles are common results during the construction process. Dust and other materials can be blown by the air. Even if these are common to happen, these cannot be taken lightly. These can be quite annoying for the workers in the construction sites and even the dusts and other airborne particles can affect the performance of the workers. The worse conditions happen when those particles are blown by the wind and these were spread in the nearby environment and surrounding. The area around the construction site will get the impact. Thus, dust control on construction sites becomes something necessary to prevent these problems. In this case, there are some tips to handle the situations.
Using Physical Barrier
One of the methods to control the dust and airborne particles is by using physical barriers. Fences and other barriers can be set to limit the wind. By setting up the barrier, it is like sealing off the construction site so the dust will be concentrated in the site and it will not affect the local environment around the site. In addition, the barrier can be set in certain height so it will reduce the strength of wind that will blow the dust. Thus, area inside the barrier will not have serious problems in handling the dust.
Using Water Droplet Dust Control System from MobyDick
The barrier is good enough as prevention of dust so the local area will not be affected. Winds can also be blocked but it does not solve the issues totally. In the end, dust still can become problems even if the wind is not so strong. Thus, it is better to use technology of dust control system from MobyDick. The dust control system uses water droplets. The droplets will be launched and these will trap the dust effectively. Even, it can prevent the dust from hindering the construction process. It is very effective to control the dust. Moreover the dust control cannons are quite affordable and it can be used without causing too much noises. Of course, it is very easy to operate.